Angle Cap

Click To Enlarge

Instructions (Angle Cap): Red asterisk (*) indicates required fields that must be filled out before you can submit your RFQ. Be sure to specify Inches or Millimeters with all dimensions.

Angle Cap Request for Quotation

  • Specify Dimensions
    "A" Inside Diameter Carlisle Plastics Company currently has Stock Production Dies for many inside diameters. If a stock production die is not available for your dimensions we will produce the die in our tool shop. "B" Inside Length Produced to your specifications in increments of 1/32” within ±.040” tolerance. Production capability varies per Inside Diameter. "C" Wall Thickness Produced to your specifications with average wall thicknesses ranging from .040" to .120". Production capability varies per inside dimensions and material used. "E" Inside Length Produced to your specifications in increments of 1/32” within ±.040” tolerance. Production capability varies per inside dimensions.
  • NOTE: IF dimensions "A" and "B" are of different lengths this part is either LEFT or RIGHT handed. Think of a piece of angle material requiring a cap to fit on each end. You would need two different caps. The view shown in the diagram above is a view from the OPEN end of the cap
  • Specify Material
  • I would like this part to be:
  • If part will be exposed to high temperature, indicate a range in F or C and the approximate time of exposure.
  • Specify Imprinting and Secondary Operations
  • Later, you will have an opportunity to attach a Drawing or Text file.
  • Specify Quantity
  • Please indicate maximum carton size, weight, interior bagging, special counts per bag, etc.
  • Additional Information
  • (Your specific application)